Logger Script
본문바로가기

제품소개

Best Global Partnership NEMO TECH CO.,LTD

제품 품목별

  • homeHOME
  • >
  • 제품소개
  • >
  • 제품 품목별

다양한 입력 모듈을 쉽게 교체하고 다양한 환경에서 응용가능

제조사
GRAPHTEC
제품명
Petit logger GL100
제품번호
GL100

견적문의 카달로그

PRODUCT INFO. 제품상세정보

GL100_1.png


GL100_2.png


GL100_3.png


GL100_4.png


PRODUCT INFO. 제품상세정보

 제 품

 세부 설명

 채널 수

 최대 4 채널
 다양한 입력 모듈 사용 (각 모듈 마다 특정타입 적용) 

 입력 방법/입력 터미널 타입

 출력 신호

 알람 (1 채널), solid state switch with optical isolation (Optocoupler, Max. load is the 30 V, 50 mA)

 인터페이스

 USB (micro USB B 타입 커넥터),
 무선 LAN (WLAN) in GL100-WL

 무선 LAN
 (GL100-WL장비 해당)

 규격: IEEE802.11b, 통신 거리: 최대. 40 m
* It varies by the condition of the LAN. Real-time transfer rate is up to 500ms. The WLAN is able to disable. (It is enabled in the factory default setting)

 저장 장치

내장 메모리: RAM (약 4.9 MB)
외장 메모리: micro SD 메모리 카드
* 최대 파일 크기 :  1.9MB (microSD메모리 카드 사용) 

 디스플레이

LCD (backlit monochrome, graphical type 128 x 64 dots)
내용: 데이터 / 세팅 메뉴
(저장된 데이터는 장비 디스플레이화면에서 다시 재생되지 않고, PC에서 확인 가능)

 기 능 

• 실시간 데이터 취득
• 실시간 LCD 화면에서 데이터값 확인 및 저장 
• 설정 메뉴어세 상태 설정 

 USB 포트 사용 시:
• 실시간 데이터 출력 
• 인터넷 메모리에 저장된 데이터 출력
• PC소프트웨어에서 GL100 컨트롤 가능 

 무선 LAN  사용 시 ( GL100-WL):
• 실시간 데이터 출력 
• 인터넷 메모리에 저장된 데이터 출력
• PC소프트웨어에서 GL100 컨트롤 가능
• 스마트 디바이스로 GL100 간단한 컨트롤 가능 
• e-mail 알람 전송

 알람

• Action
Outputs the signal when the measuring data reaches the present conditions of alarm
• Source
Level of measuring data
• Detecting method
Condition: Higher or lower (signal is higher or lower than the threshold)
Combination: OR

 트리거

• Action
Start or stop the recording of captured data by trigger
• Source
Start trigger: OFF, Level (*), Alarm, or Date
Stop trigger: OFF, Level (*), Alarm
* Level trigger is available in the analog input of the GS-4VT, GS-4TSR, and GS-3AT module.
• Detecting method of the Level (*)
Condition: Rising or Falling (signal is passed through the threshold)
Combination: OR or AND

 방진 / 방수

 IP54 compatible (*)
 * It is effective only in the condition that the input module is set to  the GL100 and then the covers of connector and battery are  closed. It is recommended to replace the packing of cover in  periodically.

 전력원

• 알칼리 배터리 (AA size x 2)
• USB bus-power (5V, 200 mA) (*)
* 전력량 : 5V ,  1A (USB장치의 AC어댑터 사용 경우)  
 (배터리/AC 어댑터 포함되지 않음)

 작동 환경

온도: -10 °C to 50 °C
습도:  80 % RH 까지 (non condensed)

 외형 치수 [W x D x H]

 약  66 x 100 x 27 mm (exclude protrusion)

 무게

 GL100-N: 약 125 g, GL100-WL: 약 130 g


PRODUCT INFO. 제품상세정보

 온도 & 습도 센서 (GS-TH)

 측정 타입

온도와 습도
온도 적산치 (계산된 수치), 이슬점 온도 (계산된 수치)

 측정 범위

온도 : -20~85 ˚C
습도 : 0~100% RH

 가속도 & 온도 센서 (GS-3AT)

 측정 타입

 3축 가속도(X-,Y-,Z-축) 및 온도

 측정 범위

 가속도 : ±2G(20 m/s2), ±5G(50 m/s2), ±10G(100m/s2)
 온도 : -10~50 ˚C

 샘플링 간격

메모리 모드 : 5~100ms, 다이렉트 모드 : 0.5초~60분

전류 & 열전지 입력 터미널(GS-4VT)

채널 개수

아날로그 전압 4채널, 로직 또는 펄스 4채널

측정 범위

전압 : 20mV~50V, 1-5V FS
열전지 : K 타입 (-200~1370 ˚C) & T type (-200~400 ˚C)
로직 (시그널 패턴) : 0~24V (일치점)
펄스 (카운트) : 최대 200 counts/샘플링 간격, 최대 온도 적산치 : 65536 counts

온도 센서 입력 터미널 (GS-4TSR)

채널 개수

4채널 센서, 로직 혹은 펄스 4채널

센서

서비스터 센서 (옵션)

측정 범위

온도 : -40~120 ˚C(센서 타입에 따라 달라짐)
로직 (시그널 패턴) : 0~24V (일치점)
펄스 (카운트) : 최대 200 counts/샘플링 간격, 최대 온도 적산치 : 65536 counts

이산화탄소 센서 (GS-CO2)

측정 타입

이산화탄소 농도

측정 범위

0~9999ppm

작동 환경

온도 : 0~50 ˚C, 습도: 최대 80% RH(비응결 상태)

조도 & 자외선 센서 (GS-LXUV)

측정 타입

조도와 UV 강도
적산된 조도(계산된 값), 적산된 UV강도(계산된 값)

측정 범위

조도 : 0~200klx
UV 강도 : 0~30mW/cm2

AC 전류 센서 어댑터 (GS-DPA-AC)

측정 타입

전류
전기 (계산된 값), 전기적 에너지 (계산된 값)

어플리케이션 회로

2선식단상, 3선식단상, 혹은 3선식3상

센서

클램온 전류 프로브(옵션), 2센서 연결 가능

측정 범위

50, 100, 200 ARMS (센서에 따라 달라짐)

 

Main body


Item

Model number

Description

PetitLOGGER GL100

GL100-WL

Main body with Wireless LAN

PetitLOGGER GL100

GL100-N

Main body without Wireless LAN


Input module and Accessories


Item

Model number

Description

Temp./Humidity Sensor

GS-TH

Sensor of Temperature (-20 to 85 ºC) and Humidity (0 to 100 % RH)

Acceleration/Temp. Sensor

GS-3AT

Sensor of Acceleration (up to 10 G), Temperature (-10 to 85 ºC)

Voltage/Temp. Input terminal

GS-4VT

Input terminal of Voltage (20 mV to 50 V), Thermocouple (K/T)

Thermistor Input terminal

GS-4TSR

Input terminal of Temperature (Thermistor -40 to 120 ºC)

Thermistor Sensor (Normal type)

GS-103AT-4P

Sensor for GS-4TSR module, 3 m long, 4 pcs/set, Temp.: -40 to 105 ºC

Thermistor Sensor (Ultrathin type)

GS-103JT-4P

Sensor for GS-4TSR module, 3 m long, 4 pcs/set, Temp.: -40 to 120 ºC

Illuminance/UV Sensor

GS-LXUV

Sensor of Illuminance and UV intensity

Carbon dioxide (CO2) Sensor

GS-CO2

Sensor of Carbon dioxide (CO2) (up to 9999 ppm)

AC Current Sensor

GS-AC50A

For GS-DAP-AC module, Cable 200 mm, Current: 50 A AC

AC Current Sensor

GS-AC100A

For GS-DAP-AC module, Cable 200 mm, Current: 100 A AC

AC Current Sensor

GS-AC200A

For GS-DAP-AC module, Cable 200 mm, Current: 200 A AC

AC Current Sensor Adapter

GS-DPA-AC

Adapter of AC Current sensor (Two sensors are able to connect)

Dual port adapter

GS-DPA

Connect up to two (2) sensors

Module Extension Cable

GS-EXC

Extension cable for input module, 1.5 m long


목록